Dynamic Simulation

The DBS file parameter imode is used to control the simulation mode. This option is set to 4 (simultaneous simulation) or 7 (sequential simulation) for dynamic simulation.

 apm.imode = 4 (simultaneous dynamic simulation)
 apm.imode = 7 (sequential dynamic simulation)

 % MATLAB example

 # Python example

Like steady-state simulation, dynamic simulation requires a square problem with no degrees of freedom (neqn=nvar). Dynamic simulation has many useful purposes including

  • Investigate step response characteristics of a nonlinear model
  • Simulate process changes for design, trouble-shooting, or planning
  • Perform what-if scenarios
  • Simulate a virtual process

Dynamic simulation is the easiest dynamic mode to configure and run. The requirement for a square problem facilitates model convergence as the solver has only to achieve feasibility with the equality constraints.