From APMonitor Documentation

Main: SPHI - APMonitor Option

Local Options | Global Options
 Type: Floating Point, Input
 Default Value: 1.0e20
 Description: Set point high for linear error model

The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value. SPHI and SPLO are used with IMODE=3,6,9 when APM.CV_TYPE=1. The single set point SP is used with APM.CV_TYPE=2.

See also Controller Objective, SP, SPLO

Retrieved from
Page last modified on October 30, 2017, at 08:17 PM